San Juan River, Primitive Fishing Skills, White Rim Trail Solo Ride

San Juan River Launch Dates

The launch calendar for the San Juan River is online. The San Juan River referred to is the section found in southeastern Utah, with the put-in just outside the town of Bluff at Sand Island. We drew our launch for 22 July, with our take-out about 28 miles downriver at the town of Mexican Hat. Ours will be a family float this year, my wife, son and I taking about five days for this short stretch of river. The float can be expanded to nearly 84 miles to the “final” take-out at Clay Hills Crossing. Just below Clay Hills is a rather new and impassable waterfall blocking the way to the upper reaches of that “lake” below. A portage around the waterfall could add innumerable miles to ones itinerary; you could float all the way to Glen Canyon Dam.

Unfortunately for those who missed the lottery date, the Sand Island calendar is nearly full in May, June and July. March, September and October dates are nearly all open, April and August are about half-full. The mid-summer dates are full for launches from Mexican Hat as well, but outside of May, June and July there are more open dates if you are considering floating from Mexican Hat to Clay Hills only. Either way, if you are hoping to get on the river act quickly as every day more red rectangles appear in each month of the calendar, indicating full launch days. If you have a limited window for floating, do not despair. Check the launch calendar daily for cancellations. Updates are posted every weekday and you might get lucky and find the date you need open. For more information on floating the San Juan River visit the Desert Explorer San Juan River page.

Primitive Fishing Skills

Last week my son and I worked on primitive fishing implements. Using a deer leg bone, an old metapodial (the elongated toe bone in the hind leg) we created a couple of skewers, or gorge hooks. Gorge hooks are straight pieces of bone in this case, sharpened on both ends. they can be made from hardwood splinters as well. A leader is tied at the center of the piece. To bait them, the gorge is turned sideways, parallel to the leader, and the bait is slid over both. Once the gorge is swallowed by the fish, tugging releases it from the bait and allows it to turn sideways and lodge inside the fish.

The process began by crushing the bone with a hammerstone, with a concerted attempt to create long, thin splinters of bone. Once this was accomplished the chosen splinters were snapped to about 1 1/2 inches in length, close to the desired final length. Next the abrading process began. I used a slab of flat but rough sandstone to abrade and form the gorge. I held the bone between my thumb and forefinger, moving it back and forth, mostly on the long axis of the piece of bone. This helps to avoid flaking off larger pieces of bone and helps create a more symmetrical finished product. Each gorge pictured below took about 1/2 hour to create. For more on primitive fishing skills and survival fishing kits, visit the Desert Explorer Primitive Skills pages.

gorge hooks created from deer leg bone

White Rim Trail Solo Ride

I have begun working on my packing list for my unsupported White Rim ride. It will not be till August, but since I had some free time I started to compile my gear list for the trek. I will take five days to do the ride, averaging about 25 miles per day, with one day to sit by the river. I will be pulling a BOB trailer with all my gear behind me. The majority of my carried weight will be in water. I will not be able to resupply water until the end of day 3 when I camp at either Hardscrabble or Labyrinth campsite. Both are on the Green River and they are just a few miles apart. I will decide which I will use this week. I will be able to resupply on day 4 as well as that will be my free day at one of these river campsites. The final day will be the ride out.

I have not yet decided on which BOB trailer I will use. They have two single-wheel models, one with a shock and one without. They weigh 17 and 14.5 pounds respectively and both have a maximum load capacity of 70 pounds. I will make an attempt at keeping all my gear at 20 pounds or less; ultimately I would prefer it weighs in at 15 pounds. But with bike tools, shoes (other than my riding shoes), and 5 days of food, 20 pounds is more realistic. Add to that 1.5 gallons of water for days 1, 2 and 3, and 1.5 gallons as a buffer- 6 gallons total, and I have added 48 more pounds. This brings my total towed weight to about 85 pounds if I choose to tow the BOB Ibex model, with a load of about 68 pounds, just under the load limit.

I will continue to refine my list and eventually post the packing list on the Desert Explorer website as the ride draws nearer.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: